Douglas Bag Tubing

Douglas Bag Tubing

This soft, flexible, ethylene vinyl acetate copolymer tubing has a 30 mm bore resulting in a nearly 50% greater cross section than traditional 22 mm bore tubing. Low profile annular rings make the tubing resistant to distortion when bending occurs so that maximum cross-sectional area is maintained.

Item# Description
50-1007 Douglas Bag Tubing,10 m (32.8 ft), ID 30 mm
50-1015 Sealing Rings, Viton O-rings fit into corrugations at the ends of Douglas bag tubing, sealing to the connector, pkg 10
For local pricing, contact your nearest distributor.

This soft, flexible, ethylene vinyl acetate copolymer tubing has a 30 mm bore resulting in a nearly 50% greater cross section than traditional 22 mm bore tubing. Low profile annular rings make the tubing resistant to distortion when bending occurs so that maximum cross-sectional area is maintained.

Harvard Apparatus offers the tubing in four lengths. The 15.2 cm, 0.5 m and 1 meter lengths are supplied with one 50-1015 Sealing Ring at each end. The 10 meter length, which can be cut to any desired length, is not supplied with Sealing Rings, see below.

The 1 m (3-1/4 ft) length tubing is typically used to connect the One-Way Air Valve, see to right, to the Tubing Valve. The 0.5 m (1.7 ft) length can be used to make the same connection as the 1 meter length, but can also connect the Tubing Valve to the Douglas Bag.
Specifications