PLUGSYS Minicase Type 609
The MiniCase housing is a low-cost and space-saving housing for 1 or 2 modules that allows PLUGSYS modules to be used as conventional stand-alone units.
The MiniCase housing is a low-cost and space-saving alternative for 1 or 2 modules that allows PLUGSYS modules to be used as conventional stand-alone units. Unlike the PLUGSYS housings Type 601 and 603, which are supplied complete and ready to use, the MiniCase has no system bus for power supply or signal link between the individual modules. For this reason, the MiniCase systems are supplied custom wired and configured to suit your requirements. The MiniCase is only suitable for use with certain modules or module combinations.
Please contact Technical Service at firstname.lastname@example.org for more information.
|Accessories||Mains Supply Cable and Operating Instructions, 2 x BNC-BNC Output lines (3 if with case extension Option 01)|
|Dimensions (H x W x D) English||6.3 x 6.3 x 9.8 in; Option 01 = 8.1 in|
|Dimensions (H x W x D) Metric||160 x 160 x 250 mm; Option 01 = 206 mm|
|Housing Construction||ABS plastic, flame-resistant to UL94VO, color RAL7032 (stone gray), with ventilation slots at sides|
|Module Positions||4 slot units max. without extension case; possible to fit 6 slot units using internal straps, Option 1 case extension|
|Power Supply||85 to 264 VAC (40 Watts), output voltage +5 VDC (5 A) and|
|Socket Combination||3-pin IEC mains with fuse and mains switch on back of housing|
|Weight (English)||3.1 lbs approx. without PLUGSYS modules|
|Weight (Metric)||1.4 kg approx. without PLUGSYS modules|